★This product pic. shows as CXS6030-S2NN-ND.
Update:2023.09.28
Model No.
CXS5020-F2NN-ND
CXS5030-F2NN-ND
Table Size (mm)
50x50
Travel Stroke (mm)
20
30
Drive Type
Ball Screw Ø8,Lead 1mm
Rail
Stage Material
Surface Treatment
Main Unit Weight (Kg)
Coupling
Accuracy Level
Wiring Method
Resolution (Pulse) (µm)
Max. Speed (Full Step) (mm / sec)
Positioning Presion (µm)
Repeatability Precision (µm)
Multi-point Repeatability Precision(µm)
Load Capacity (Kgf)
Missed Step (µm)
Moment Stiffness
Pitch / Yaw
Parallelism (µm)
Dynamic Straightness (µm)
3
Dynamic Parallelism (µm)
10
Motor Type
2-Phase Stepper
Motor Shaft Numbers
☐ 28 Double Shafts
Motor Brand
GMT
Motor Model
2MS-N28D32A
Driver Brand
Driver Model
GTR22G-D
Stage Side Connector
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS
Controller Side Connetor
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)
Origin Sensor
Photoelectric sensor GMT-sensor
Limit Sensor
Power Voltage
24V ± 10%
Control Output
NPN open collector output under 24V 8mA
Output Control
Testing (sensing):output transistor OFF (closed)
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver.
♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.
GMT has defined different axis as the following figuration according to the movement direction:
Horizontal movement direction is X and Y axis.
Vertical movement direction is Z axis.
Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis.
Green arrows present the specified axis movement direction.